• If the phone number is a local or
Seven-Digit Dialing
If you can make a local call by dialing only seven digits instead of ten, you can tell the phone to hide your local area code in the Caller ID list; any calls from outside your area code will show all ten digits.
To program your local area code:
) Press [Menu/Select]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
2)Use the number keypad ([0] through [9]) to enter a
3)Press [Menu/Select]. You will hear a confirmation tone. The setting applies to all registered handsets and the base.
Note: If you have multiple bases, select the base before programming the area code (see page 25).
The phone uses the stored area code as a filter. When a call comes in, the phone compares the incoming area code to the code programmed on the phone. If the two codes match, the station hides the area code in the Caller ID list.
When you are viewing a Caller ID record, you can show the hidden area code by pressing [#]. Press [#] again to hide the area code. When you dial from a Caller ID record or store a Caller ID record in the phonebook, the phone dials or stores the digits exactly as they appear on the display. If you need to use ten digits, be sure to press [#] to show the area code before you dial or store the number. See page 28 to store a Caller ID record in the phonebook.
Deleting Caller ID Numbers
To delete only one Caller ID number, press [ 
] when the phone is in standby, and then find the number you want to delete. Press [Menu/Select] and select DELETE ENTRY. When the phone asks you to confirm, select YES.
To delete all the Caller ID numbers, press [ 
] when the phone is in standby, and then press [Menu/Select]. When the phone asks you to confirm, select YES.
Notes: • When you delete a Caller ID number, you delete it permanently.
Using Caller ID, Call Waiting, and Redial Lists
36
