Uniden DECT2085 manual Recording a Personal Greeting, Selecting a Greeting

Setting Up the Answering System

Recording a Personal Greeting

Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: “Hello, no one is available to take your call. Please leave a message after the tone.” You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.

) On the base, press [Menu/Select]. Select the ANSW. SETUP menu, and then the RECORD GREETING submenu.

2)RECORD GREETING, START [SELECT] appears. Press [Menu/Select] to start the recording. Begin recording after the announcement.

The message counter on the base LCD displays “30”, and then begins to count down.

3)When you finish recording, press [Menu/Select] again or press []. You will hear a confirmation tone, and your recorded greeting plays back for you.

Selecting a Greeting

Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can also switch back and forth between the pre-recorded greeting and your own greeting at any time.

) On the base, press [Menu/Select]. Select the ANSW. SETUP menu, and then the GREETING OPTIONS submenu..

The system plays the current greeting.

2)To keep this greeting, do nothing.

3)To switch to the other greeting, press [] or [] on the four-way function key while the system is playing the current greeting.

4)Each time you press [] or [], the system switches between the pre-recorded and the personal greeting. The last greeting you hear is used as the current greeting.

45