yEach of these bases can support up to two DRX332 MULTIRANGE chargers, including any that were supplied with your phone.
yUsually, you can't tell when a handset switches between the base and the charger in the middle of a call, but sometimes, you might notice a brief pause in your conversation.
Registering the MULTIRANGE charger
#Registering the MULTIRANGE charger is a separate process from registering the handset. You can use the charger even if the handset is not registered.
1.On the base, press and hold FIND when the phone is in standby.
2.On the bottom of the MULTIRANGE charger, press and hold the registration
button until the LINK light starts to blink (about 2 seconds).
3.Release the button and wait for the LINK light to turn on and steady (this can take about 90 seconds).
If the LINK light doesn't turn on, disconnect the charger's AC adapter. Wait about 20 seconds, then try these steps again.
7
