DESK INSTALLATION'
Your DS70 can be fitted with a Desk Stand or mounted on the wall.
Beforeconnectingyour phoneline,fully chargethe
.
.
.
.
Thread both the telephone line cord and the power cord through the
Insert the two tabs, located on the base of the Desk Stand, into the slots on the bottom of the Base Unit.
Push down gently until the tab locks into the top of the Base Unit.
Now connect the telephone line cord and AC power cord into the Base Unit as
shown on page 8.
Placethepowercordso thatit doesnot createa trip hazardor whereit could becomechafedandcreatea fire or electricalhazard.
Use only the Uniden AC
adaptor supplied with this
phone. Make sure it is switched ON at all times.
,
3, pushthedesk
stand down gently untilthe tab locks
intothe top of the base unit
1.telephone line & power
cords threaded through the desk stand,
WALLINSTALLATION
Your DS70 can be wall mounted on a standard telephone wall plate.
. Do not install the desk stand.
. Now connect the telephone line cord and AC power cord into the Base Unit as
shown on page 8.
. Position the Base so the mounting studs on the standard telephone wall plate fit into the holes on the back of the Base Unit.
. Slide the Base down on the mounting studs until it locks into place.
7
