Uniden DS845 quick start Registration, Different number to enable functions such as Call Transfer

	REGISTRATION
	The original handset supplied with the Main Base is already registered as handset 1, this
	leaves handset numbers 2 - 7 available. It is very important to allocate each handset a
	different number to enable functions such as Call Transfer.
	Registration Process
If a handset is registered at	Follow this process for each additional handset (DS805) that needs to be registered to the
any time as handset 1, all	Main Base or for registering your Main Handset.
	1. Remove the handset from its charger
other handsets will need to
	2. Press flash/reg on the handset (Fig 1).
be registered again from
	3 Press the number 2 (Fig 2) for handset 2.
Step 1.
		REGISTER AS
	Fig 1.	HAND #2
		Fig 2.
If you have additional		REGISTER AS
handsets, repeat the same
		HAND # (3 - 7)
process, but at Step 2 select
		Fig 3.
a number from 3 - 7 to
register the next handset as
(fig 3)	4. Place the handset in the Main Base Unit (Fig 4).

The Registration process needs to be completed within 15 seconds, 3 beep tones will indicate that the time has been exceeded. Please start the process again.

After Registration the	Fig 4.
handset number is shown
on the Display screen either					Handset
during a call or while the	Fig 5.	HANDSET:	1	TALK HIGH 1
handset is charging (Fig 5).		NEW:	1		Registration
					number
		TOTAL:	1
					displayed
		Charging		On a Call

15