Uniden DS845 Remote access away from home, Remote room monitor, Call your telephone number, Then

Remote access away from home:

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, play or delete messages, record a new outgoing message - or - monitor sounds in the room.

1. Call your telephone number.

2. While the greeting message is played, press # and your PIN code within 2 seconds. If the answering system is off, let it ring 10 times. When the greeting plays, press # and your PIN code within 2 seconds.

3.The answering system announces the number of messages stored in memory. Then the message playback automatically begins.

4.You may continue to listen to your message, or you may select a command from the following chart.

Command			Function
Press	#	then 1	Repeat a message
Press	#	then 2	Play the messages
Press	#	then 3	Skip a message
Press	#	then 4	Delete a message
Press	#	then 5	Stop message playback
Press	#	then 6	Answering system ON
Press	#	then 7	Voice memo record / stop
			( up to 4 minutes recording time )
Press	#	then 8	Greeting message record / stop
Press	#	then 9	Answer system OFF
Press	#	then	Room monitor

5.After all of your messages have played, or the playback time exceeds 4 minutes, you will hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above.

6.When you finish, hang up to exit the system. The answering system automatically returns to standby.

Remote room monitor:

You can call your answering system from any touch-tone phone and monitor sound in the room where your base is installed.

1. Call your telephone number.

2. While the greeting message is played, press #	and your PIN code. If the Answering
System is off, let it ring 10 times. The tone sounds. Press #		and your PIN code.

3.The answering system announces the number of messages stored in memory. Then the message playback automatically begins.

4.Press # then 5 to stop the messages.

5. Press	#	then	. You hear sounds in the room where your phone is installed.
After 15 seconds, the answering system returns to the Command Waiting mode.
6. Press	#	then	to monitor the room for another 15 seconds. Or select another

remote function. Or hang up to exit the system. The answering system automatically returns to standby.

22