STORING PHONE NUMBERS AND NAMES
NOTE
When storing a number, always include your area code (eg: 02), so name tagging will operate (refer page 15).
NOTE
The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits.
Memory Dialing allows you to dial a number using just a few key strokes. You can store up to 29 phone numbers in the memory.
Since each step must be completed within 10 seconds, it may be advisable to review these instructions before starting.
1.Press and hold memory until MEMORY STORE is displayed.
2.Press
or 
or enter a two digit
number ( 0 | 1 2 9 ) to select the |
3. Press select | - STORE NAME is displayed |
and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location has a number already stored.
4.Use numeric key to enter the name. The name cannot exceed 12 characters.
Use #
and 
to move the cursor to the next letter - or to create a space.
Use delete/page to delete characters as needed.
5. Press select - STORE NUMBER is displayed.
6.Use the number keypad to enter the phone number. It cannot exceed 24 digits.
Use redial/p to enter a pause. The screen displays P.
Each pause counts as one digit and represents one and half second delay in time between digits.
Use delete/page to delete digits as needed.
7. Press select - the handset beeps and displays the confirmation screen.
8.Press memory to return to standby mode or select another location to programme.
MEMORY STORE 01
EMPTY
02EMPTY
STORE NAME
EDIT MEMORY 01 DELETE MEMORY 01 GO BACK
STORE NUMBER
STORE NUMBER 95979035
MEMORY 01 STORE
MEMORY STORE 01
FRED
02 JOHN SMITH
10
