Adjusting the Earpiece and Speaker Volume
You can choose from six volume levels for the earpiece and speaker. To adjust the volume while on a call, press [ 
] to make it louder or [
] to make it softer.
Adjusting the Audio Tone and Clarity Boost
If you aren't satisfied with the audio quality of your phone, you can adjust the Audio Tone of the earpiece while on a call. Your phone gives you three audio tone options: low, natural, and high; the default setting, Natural Tone, is recommended for hearing aid users. Audio tone adjustments only apply to the earpiece, not the speakerphone. To adjust the audio tone:
1. With the phone in talk mode, press [select/ 
] to cycle through the three audio tone options.
2. When the desired option appears on the display, stop.
3. After two seconds, the displayed audio tone is set, and the display returns to normal.
If you encounter interference while using your phone, you can manually improve the sound by setting the Clarity Boost to on. This works only when the phone is in use, so while you are on a call:
1. Press [menu/clear].
2. Move the cursor to CLARITY BOOST, and then press [select/ 
] . BOOST ON and B appear on the display. Use the same procedure to turn off Clarity Boost. BOOST OFF appears.
Finding a Lost Handset
With the phone in standby, press [find hs] on the base. All registered handsets will beep for 60 seconds, and PAGING appears on the handset display. To cancel paging, press any key on the found handset or press [find hs].
[38]
