39
Adjusting the Ringer, Earpiece and Speaker Volume

Adjusting the Ringer Volume

You can choose from three ringer volume settings on the handset (off, low, high). With
the phone in standby, use [ / ] on the four-way function key to adjust the ringer vol-
ume.

Adjusting the Speaker Volume

Ear speaker: You can choose from six volume levels for the earpiece speaker. To ad-
just the earpiece volume while on a call, press [ ] (to make it louder) or [ ] (to make
it softer).
Speaker: You can choose from six volume levels for the handset speakerphone. To
adjust the speaker volume while on a call, press [ ] (to make it louder) or [ ] (to
make it softer).

T-coil (Handset only)

Digital spread spectrum cordless phones generate magnetic signals that could cause noise to be heard by users
wearing hearing aids set to “T” mode. (The “T” mode is only found on hearing aids equipped with a telecoil (“T” coil)
feature). This phone includes a special “T-coil” mode that, when activated, reduces the magnetic noise generated by
the handset.
To activate the “T-coil” mode perform the following steps on your handset:
While on a call:
Press and hold [mute] for at least 5 seconds or until a beep tone is heard.
The “T-coil” mode icon will appear on the handset LCD display.
1)
2)
1
456
23
abc
ghi jkl mno
def
1
456
23
abc
ghi jkl mno
def