Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the charging contacts on both the handset and the charger once a month. Use a dry cloth or pencil eraser to clean.
Register the Handset
contacts
YOU NEED TO REGISTER THE DSS2405 TO THE MAIN BASE BEFORE USE!
DSS2415 | DSS2455/2465 | Charger |
Main Base | Main Base |
|
1 After placing the batteries in the handset, charge for 10 minutes. Then remove the handset from the charger and place it in the main base (DSS2415, DSS2455, or DSS2465).
2 Registration starts automatically. While registering, “Handset Registering” appears in the display.
3 When the registration is complete, “Registration Complete” appears in the display.
If the registration fails, “Registration Failed” appears in the display. Try the above steps again.
4 Once registration is complete, place the handset back in the charger for 17 to 20 hours to ensure the batteries are fully charged.
•An extra handset can be registered when the main base is in the standby mode.
• In some cases you may need to attempt registration a few times.
– 5 –
