Notes: • For best results, wipe off dirt or shake water from handset before placing in the charging cradle.
•Due to the magnetic inductive charging used with this model the bottom of the handset might be warmer than room temperature when you first remove it from the charging cradle. However, the warmth should not be excessive or uncomfortable to touch.
•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.
Caution:
-Keep magnetic items away from the handset.
-Don’t place the handset where it will be subjected to direct sunlight for long periods of time.
Registering the Handset
If you have purchased this accessory handset separately, it must be registered to the base before you can use it.
Notes: • The handset must be fully charged before attempting to register.
•Only one handset can be registered at a time.
Handsets that have not been registered display:
) If the other base has an LCD display:
• With the phone in standby, press [Menu/Select] on the base. Press [
] to move the cursor to REGISTER HANDSET and then press [Menu/Select]. HANDSET REGISTERING appears.
If the other base does not have an LCD display:
• Disconnect the base AC adapter. Then press and hold [find hs] or [find] while you reconnect the adapter. Keep pressing [find hs] or [find] until the charge/in use LED starts to blink.
2) On the handset, press and hold [#] until the handset beeps and displays HANDSET REGISTERING.
3) When the handset finishes registering, it shows REGISTRATION COMPLETE in the display.
