5) Insert the bottom end of the cover into the grooves on the handset and lay the cover over the battery compartment. Tighten the four screws securely.
Notes: • If there is any foreign matter on the rubber seal located on the under side of the battery cover, the handset may not be water tight.
•The rubber seal should be replaced every two years, even if it does not look worn.
Installing the Belt Clip
Insert the tabs on the sides of the belt clip into the holes on either side of the handset. Press the belt clip down until it clicks into place. (Tug on the clip to make sure it’s secure.)
To remove the belt clip, gently pull the tabs out of the holes, then slide the belt clip off of the handset.
