Uniden DX14560 Series, DX14561 Series manual Activating Caller ID on Call Waiting HS1 only

Activating Caller ID on Call Waiting (HS1 only)

Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must subscribe to Caller ID service through your local telephone provider to use this feature.

1) When the phone is in standby, press and hold [cid/menu]. The following screen appears. 2) Press [vol//] to move the pointer to select CIDCW. 3) Press [select/channel] to toggle and turn on Caller ID on Call Waiting.

4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby.

Note: To enable the setting change of CIDCW, you need to return the handset to the base unit when you complete the setting.

Programming Your Area Code

In some areas the telephone company may allow you to place a local call by dialing only 7 digits (instead of 10). If this is the case in your area, you can program your local area code in your phone. Programming your area code will allow you to see the caller’s 7-digit phone number which will allow you to easily return the local call without modifying the number before dialing. If you get a call from outside your area code, you'll see all 10 digits.

To program your area code:

1) When the phone is in standby, press and hold [cid/menu]. The following screen appears.

16