Call was answered before the second ring | Uniden DXAI4588 guide

	Symptom	Suggestion
		• The call was answered before the second ring.
	The Caller ID does not	• The call was placed through a switchboard.
	The Caller ID does not	• Charge the handset.
	display.	• Charge the handset.
	display.	• Your Caller ID service may not be active; contact your local telephone service

		provider.
	A handset is not working.	• Make sure the battery pack is connected to the handset and fully charged.
	A handset is not working.	• Re-register the non-functional handset.
		• Re-register the non-functional handset.
	Unavailable message is	• Make sure the other handset is not already in use. Both handsets cannot be in
	Unavailable message is	talk at the same time.
	displayed on the LCD screen	talk at the same time.
	displayed on the LCD screen	• Place the handset in the base for at least 5 seconds to re-register to the base.
	of the handset.
	of the handset.	• Make sure the handset is not too far from the base when trying to use.

	The handset doesn’t
	communicate with the base or	• Re-register both handsets (see page 13).
	the other handset.
	No 3- way conversation.	• Only one handset at a time can talk with an outside caller. To allow the other
	No 3- way conversation.	handset to talk to the caller, transfer the call.
		handset to talk to the caller, transfer the call.
	The answering machine does	• Make sure the AC adapter is plugged into wall outlet.
	not work.	• Make sure the answering machine is turned on.
	The answering machine does	• Set the record time to either the one minute or four minute option.
	not record any messages.	• The memory may be full. Delete some or all of the saved messages.

53

Image 54

Uniden DXAI4588 manual Call was answered before the second ring

Contents

Page Contents Accessibility Welcome Terminology Manual Conventions Main Phone Features Answering Machine FeaturesProduct Overview Controls and Functions Handsets Main Base Unit Extra Charging Cradle Installing the Phone Choosing the Best Location Installing the Rechargeable Battery Packs into the Handsets Installing the Base Unit and Charging Cradle Page Mounting the Base Unit on a Wall Standard wall plate mounting Direct wall mounting Register Handsets to the Main Base before Using When to Re-register Handsets Basic Setup Activating AutoTalk Activating Caller ID on Call Waiting HS1 only Programming Your Area Code Choosing the Dialing Mode HS1 only Setting the Language Using the Speed Dial Memory Storing a Name and Number in Memory Number of times key is pressed If you make a mistake while entering a name Storing Caller ID in Speed Dial Memory Using Your Phone Making and Receiving CallsMaking a Call from Speed Dial Memory To cancel speed dialing Making a Call from the Caller ID List Transferring a Call To transfer a callTo receive a transfer call Redialing the Last Dialed Number Selecting the Ring Tone and VolumeAdjusting the Earpiece Volume Temporarily Mute Ringer Using Call Waiting Selecting a Different Channel Tone Dialing Switch-over Find Handset Caller ID and Cidcw Caller ID on Call Waiting Caller ID on Call Waiting Cidcw Viewing the Caller ID Message List Deleting all Caller ID names/numbers Deleting Information from the Caller ID ListDeleting a Caller ID message Press delete/transfer Features Integrated Answering Machine Setting Up Your Answering Machine Answering Machine Setting Setting the Time Setting a Personal Security Code PIN Setting the Ring Time Selecting the Message Record Time Setting the Message Alert Tone Setting Your Outgoing Message Greeting Preset messageSelecting the Language Recording a personal outgoing message Greeting Choosing between the two outgoing messages Setting the Base Ringer Volume Adjusting the Speaker Volume LevelTemporarily Mute the Base Ringer and Call Screen Using Your Answering Machine Turning the Answering Machine On/Off Reviewing Messages MessagesDay it was received Recording a Conversation Voice Memo Remote OperationPage Turn on the Answering Machine Remotely Changing the Digital Security Code Maintenance SpecificationsPower Failure Low battery alert Talk and Standby Times Battery replacement and handling Cleaning the battery charging contacts Symptom Suggestion Charge/in use LED or TroubleshootingCommon Issues Traveling Out-of-Range Symptom Suggestion Call was answered before the second ring Adjust the speaker volume on the base unit Liquid Damage Handset Base Precautions Rechargeable Nickel-Cadmium Battery Warning Important Safety Instructions FCC Wants You To Know Radio Interference Shown on the label Cordless Telephone Privacy Terminal EquipmentRadio Equipment One Year Limited Warranty O, P, Q IndexF, G, H, I, J, K, L X, Y, Z Memo Memo Remote Operation Card Remote Operation Card Memory Location Memo Task Key At Uniden, we’ll take care of you