Uniden DXAI7288-2 manual Use only the supplied

C. Connect the Main Base and Charging Cradle, and Charge the Handsets

1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2) Place one handset in the main base and the other in the charging cradle with the keypad facing forward.

3) Make sure the charge in use LED and charge LED illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the cradle's charging contacts.

• Connect each AC adapter to a continuous power supply.

• Place each cradle close to the AC outlet so that you can unplug the AC adapter easily.

4) Charge your handsets at least 15-20 hours before plugging into the phone line.

5)Once the handset battery packs are fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet.

If your telephone outlet isn't modular, contact your telephone company for assistance.

Modular

w w w . u n i d e n . c o m

!

•Use only the supplied

AD-314 AC adapter for the main base and AD-310 for the charging cradle.

Do not use any other AC adapter.

•Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.

G E T T I N G S T A R T E D [ 8 ]

G E T T I N G S T A R T E D