note

•Make sure to return the handsets to the cradles after each phone call.

•If you transfer the call and it is not picked up after 5 minutes, the call will be disconnected.

When to Re-register Handsets

1)You’ll need to re-register the second handset (follow steps on page 12) each time the digital security code is changed. Refer to page 51 for details regarding the Digital Security Code.

2)When there is a power failure for more than one hour:

If power failure occurs (e.g. due to electrical storm or if the unit is unplugged during a move), both handsets will need to be re-registered. To re-register, follow the same registration process on page 12.

3)If the second handset’s battery becomes very low, the handset must be recharged for 15- 20 hours and re-registered to the main base.

Call Transfer Feature

Your cordless phone allows you to transfer outside calls from handset to handset; only one handset at a time can talk with an outside caller. The second handset cannot go off hook to listen to conversations or make an outgoing call while the other handset is in use.

To transfer a call

1) During a call, press the delete/transfer key. The call will automatically be placed on hold and the transfer tone sounds.

2) When the other handset receives the call, the transfer tone stops. To cancel the transfer and return to the caller, press the delete/transfer or talk/flash key on the handset.

To receive a transfer call

Pick up the handset from the cradle (when AutoTalk is set to on), or pick up the handset and press the talk/flash key to answer the transferred call. Additionally, you can answer the transferred call by pressing any number key, (when AutoTalk is set to on).

[ 1 3 ] G E T T I N G S T A R T E D

w w w . u n i d e n . c o m

Page 14
Image 14
Uniden DXAI7288-2 When to Re-register Handsets, Call Transfer Feature, To transfer a call, To receive a transfer call