5)Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged.
If your telephone outlet isn't modular, contact your telephone company for assistance.
Modular
Mounting the Base Unit on a Wall
Setting the handset retainer clip for wall mounting
1)On the base unit, pull the handset retainer clip out of the slot and rotate it clockwise 180 degrees.
2)Flip the retainer clip from front to back. Slide it back into the slot so that the lip of the retainer is up and the ▼ is down. The retainer holds the handset in place.
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Snap the wall mount adapter into the notches on the base bottom.
2)Plug the AC adapter to the DC IN 9V jack.
3)Route the AC adapter cord through the molded wiring channel
as shown.
4) Plug the AC adapter into a standard 120V AC wall outlet.
5) Plug the telephone line cord into the TEL LINE jack. Route the cord through the molded wiring channel as shown.
www.uniden.com
Flip the hook tab over so the tab holds the handset.
DO NOT use an AC outlet controlled by a wall switch.
G E T T I N G S T A R T E D [ 11 ]
GETTING STARTED
