![](/images/new-backgrounds/1255466/25546627x1.webp)
6) Plug the telephone line cord into the telephone outlet.
7) Raise the antenna to a vertical position.
8) Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.
Direct wall mounting
If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
• Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
•Use #10 screws (minimum length of
1)Insert two mounting screws into the wall, (with their appropriate anchoring device),
Allow about 1/8 of an inch between the wall and screw heads for mounting the phone.
2)Refer to steps 1 through 8 on pages
[ 12 ] G E T T I N G S T A R T E D | www.uniden.com |