Cisco Systems ATA 186 Parameters for Configuration Method and Encryption, UseTFTP, TftpURL, Range

Chapter 5 Parameters and Defaults

Parameters for Configuration Method and Encryption

Parameters for Configuration Method and Encryption

This section describes parameters for instructing the Cisco ATA how to locate its TFTP server and how to encrypt its configuration file. These parameters are:

•UseTFTP, page 5-4

•TftpURL, page 5-4

•EncryptKey, page 5-5

UseTFTP

Settings

1—Use the TFTP server for Cisco ATA configuration.

0—Do not use the TFTP server for Cisco ATA configuration.

Value Type

Boolean

Range

0 or 1

Default

1

Voice Configuration Menu Access Code

305

Related Parameters

•TftpURL, page 5-4

•EncryptKey, page 5-5

•OpFlags, page 5-17(bits 0 and 3)

TftpURL

Description

Use this parameter to specify the IP address or URL of the TFTP server. This string is needed if the DHCP server does not provide the TFTP server IP address. When the TftpURL parameter is set to a non-zero value, this parameter has priority over the TFTP server IP address supplied by the DHCP server.

Optionally, you can include the path prefix to the TFTP file to download.

For example, if the TFTP server IP address is 192.168.2.170 or www.cisco.com, and the path to download the TFTP file is in /ata186, you can specify the URL as 192.168.2.170/ata186 or www.cisco.com/ata186.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

5-4 Ol-3141-01