Cisco Systems ATA 186 Mid-call Services, Procedure Reference, Voice mail access, Redial, page A-2

Chapter 1 Cisco Analog Telephone Adaptor Overview

Software Features

Table 1-1 Pre-call Services and Where to Find End-user Procedures

Service	Procedure Reference
Voice mail access	Access Voicemail, page A-1
Forward all calls to another number	Activate Call-Forward-All, page A-2
Cancel the forwarding of all calls	Cancel Call-Forward-All, page A-2
Redial the most recent number dialed	Redial, page A-2
Use speed dial	Speed Dial, page A-2
Answer a call in your call-pickup group	Call Pickup, page A-3
Answer a call outside of your call-pickup group	Group Call Pickup, page A-3
Set up a conference	MeetMe Conference, page A-3

Mid-call Services

The method of initiating and using mid-call services for the SCCP protocol differs according to mode. The following three modes are available for invoking mid-call services:

•Bellcore Style (default)

•Cisco VG248 Style

•Cisco ATA Style

The mode can be configured using bits 28 and 29 of the ConnectMode parameter (see the “ConnectMode” section on page 5-13).

Table 1-2lists the mid-call services that the Cisco ATA supports for each of the three modes. Table 1-2also includes references to where the end-user procedure is described for each service.

Table 1-2 Mid-call Services and Where to Find End-user Procedures

Style and Related Services		Procedure Reference
Bellcore style (default) services:		Bellcore Style, page A-4
•	Call transfer
•	Conference call
Cisco VG248 style services:		Cisco VG248 Style, page A-5

•Three-way call

•Call transer

•Conference call

Cisco ATA style services: Cisco ATA Style, page A-6

•Call hold/resume

•Call transfer

•Conference call

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

1-8 OL-3141-01