Cisco Systems ATA 188, ATA 186 Installation and Configuration Overview, Action, Reference, 3-23

Chapter 1 Cisco Analog Telephone Adaptor Overview

Installation and Configuration Overview

Installation and Configuration Overview

Table 1-3provides the basic steps required to install and configure the Cisco ATA to make it operational in a typical Cisco CallManager environment.

Table 1-3 Overview of the Steps Required to Install and Configure the Cisco ATA and Make it Operational

Action		Reference
1.	Plan the network and Cisco ATA configuration.
2.	Install the Ethernet connection.
3.	Install and configure the other network devices.
4.	Install the Cisco ATA but do not power up the Cisco ATA	What the Cisco ATA Package Includes, page 2-2
	yet.
Note	If you power up the Cisco ATA before adding the	Resetting the Cisco ATA Using Cisco CallManager, page
	Cisco ATA to the Cisco CallManager, you will need to	3-23
	perform a reset once you have added the Cisco ATA to
	the Cisco CallManager.
5.	Download the desired Cisco ATA release software zip file	Chapter 3, “Configuring the Cisco ATA for SCCP”
	from the Cisco web site, then configure the Cisco ATA.
6.	Add the Cisco ATA to the Cisco CallManager.	Chapter 4, “Adding the Cisco ATA to the
		Cisco CallManager”
7.	Power up the Cisco ATA.
8.	Periodically, you can upgrade an individual Cisco ATA or	Chapter 7, “Upgrading the Cisco ATA Signaling Image”
	all Cisco ATAs to a new signaling image by using the
	Cisco CallManager administration web pages.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

OL-3141-01 1-9