Cisco Systems ATA 186 Account Information Parameters, StaticNetMask, EPID0orSID0 and EPID1orSID1

Chapter 5 Parameters and Defaults

Account Information Parameters

StaticNetMask

Description

Configure the statically assigned subnet mask using this parameter if the DHCP parameter is set to 0.

Value Type

IP address

Default

255.255.255.0

Voice Configuration Menu Access Code

10

Related Parameters

•DHCP, page 5-6

•StaticIp, page 5-7

•StaticRoute, page 5-7

Account Information Parameters

This section describes the following identification parameters:

•EPID0orSID0 and EPID1orSID1, page 5-8

•CA0orCM0 and CA1orCM1, page 5-9

EPID0orSID0 and EPID1orSID1

SIDx specifies whether to enable the Phone 1 and/or Phone 2 ports on the Cisco ATA to register with Cisco Call Manager. (EPIDx is not for SCCP.) SIDx can be one of the following values:

•0—Disables port; port does not attempt to register with Cisco CallManager

•. or <mac_address>—Uses the default Skinny ID, which is the Cisco ATA MAC address (MAC) for the Phone 1 port and MAC[1-5]+01 for the Phone 2 port. The port attempts to register with Cisco CallManager.

•For example, if the MAC address of the Cisco ATA is 0001.2D01.073D, then SID0 is 0001.2D01.073D and SID1 is 012D.0107.3D01.

•Other values are reserved.

Value Types

Alphanumeric string for each parameter

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

5-8 Ol-3141-01