Cisco Systems ATA 188 EncryptKey, Value Type, Range, Default, Related Parameters, Description

Chapter 5 Parameters and Defaults

Parameters for Configuration Method and Encryption

Note From the voice configuration menu, you can only enter the IP address; from the web configuration page, you can enter the actual URL.

Value Type

Alphanumeric string

Range

Maximum 31 characters

Default

0

Voice Configuration Menu Access Code

905

Related Parameters

•UseTFTP, page 5-4

•Domain, page 5-16

EncryptKey

Description

This parameter specifies the encryption key that is used to encrypt the Cisco ATA configuration file on the TFTP server.

The cfgfmt tool, which is used to create a Cisco ATA binary configuration file (see the “Using the EncryptKey Parameter and cfgfmt Tool” section on page 3-14), automatically encrypts the binary file, using the rc4 encryption algorithm, when the EncryptKey parameter has a value other than 0.

Note If the Cisco ATA configuration file is not encrypted, the value must be set to 0.

Value Type

Alphanumeric string

Range

Maximum eight characters

Default

0

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

Ol-3141-01 5-5