Cisco Systems ATA 186 NPrintf, ConfirmTone, Description, Voice Configuration Menu Access Code

Chapter 5 Parameters and Defaults

Optional Feature Parameters

ConfirmTone

Description

The Cisco ATA plays the confirm tone to prompt the user to enter a phone number when invoking a supplementary service, such as call-forwarding, or blind transfer.

Default values for the nine-integer array

•ntone—1

•freq0—30467

•freq1—0

•level0—5970

•level1—0

•steady—0

•on-time—480

•off-time—480

•total time to play tone—1920

Voice Configuration Menu Access Code

925

NPrintf

Description

Use this parameter to specify the IP address and port of a host to which all Cisco ATA debug messages are sent. The program prserv.exe, which comes bundled with the Cisco ATA software, is needed to capture the debug information.

Syntax

<HOST_IP>,<HOST_PORT>

Example

If the program prserv.exe is running on a host with IP address 192.168.2.170 and listening port 9001, set NPrintf to 192.168.2.170.9001. This causes the Cisco ATA to send all debug traces to that IP address.

Value Type

Extended IP address

Default

0

Voice Configuration Menu Access Code

81

Related Parameter

TraceFlags, page 5-27

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

5-26 Ol-3141-01