Chapter 8 Troubleshooting

Frequently Asked Questions

Q. Can I change the RTP frame size of voice codecs for the Cisco ATA when using with SCCP image?

A. Yes. The RTP frame size is controlled by the Cisco CallManager when the Cisco ATA uses the SCCP image. To change the RTP frame size for a voice codec, follows the steps below:

Procedure

Step 1 Open your web browser

Step 2 Access the CallManager administration page:

http://<IP address>/ccmadmin

Step 3 From the Service menu, select Service Parameters.

Step 4 From the Server drop-down list, select the Cisco CallManager for the Cisco ATA.

Step 5 From the Service drop-down list, select Cisco CallManager.

Step 6 On the Service Parameters Configuration screen, locate the category for the Preferred G711/G723/G729 Millisecond PacketSize menu. From the corresponding drop-down list, select the RTP packet size for the G.711/G.723/G.729 voice codec.

Q. Can I enable/disable silence suppression for G.711/G.723/G.729 for the Cisco ATA when using the SCCP image?

A. Yes. If the Cisco ATA silence suppression configuration bit (AudioMode Bit 1) is available in this version of the SCCP signaling image, you should always set this bit to a value of 1. The

Cisco CallManager will then control silence suppression for the voice codec. To change the silence suppression option, follows the steps below:

Procedure

Step 1 Open your web browser

Step 2 Access the Cisco CallManager administration page:

http://<IP address>/ccmadmin

Step 3 From the Service menu, select Service Parameters.

Step 4 From the Server drop-down list, select the Cisco CallManager for the Cisco ATA.

Step 5 From the Service drop-down list, select CiscoCallManager.

Step 6 On the Service Parameters Configuration screen, locate the category for System Wide Silence Suppression. From the corresponding drop-down list, select True to enable silence suppression or select False to disable silence suppression.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

 

OL-3141-01

8-7

 

 

 

Page 122 Page 124
Page 123
Image 123
Cisco Systems ATA 188, ATA 186 manual Procedure
Page 122 Page 124

ATA 188, ATA 186 specifications

The Cisco Systems ATA 186, or Analog Telephone Adapter, revolutionized the way traditional telephony interacted with Voice over Internet Protocol (VoIP) systems. Designed primarily for home and small office use, the ATA 186 allows users to connect standard analog phones and fax machines to a network, enabling them to take advantage of the benefits of VoIP technology.

One of the defining features of the ATA 186 is its dual port architecture. It includes two FXS ports, allowing users to connect up to two analog telephones. This functionality means that multiple devices can leverage VoIP services simultaneously without the need for separate adapters for each phone. The flexibility of the ATA 186 helps streamline the user experience, facilitating voice communication over an IP network while ensuring users can still use their existing phone equipment.

The ATA 186 employs various technologies to maintain high-quality voice calls. It supports standard voice codecs such as G.711 and G.729, which ensure efficient bandwidth usage while preserving call clarity. The adaptive jitter buffer technology further enhances call quality, compensating for network variations and minimizing latency, which is crucial for clear and uninterrupted conversations.

Additionally, the ATA 186 provides users with advanced calling features that were traditionally available only on PBX systems. These features include caller ID, call waiting, and voicemail functionality, integrating seamlessly with typical telephony services. The device also supports T.38 fax relay, allowing users to send and receive faxes over the internet, thus addressing the needs of environments where fax communication remains essential.

The security of VoIP conversations is also a priority for the ATA 186. It employs encryption protocols such as Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS), ensuring that voice data is securely transmitted across the network. This focus on security helps protect sensitive information transmitted during calls.

Installation and configuration of the ATA 186 is streamlined, with an intuitive web-based interface that simplifies the setup process. This accessibility makes it suitable for users with varying levels of technical expertise, as frequently required adjustments, such as network configurations and firmware updates, can be easily managed.

In conclusion, the Cisco Systems ATA 186 stands out as a versatile and robust solution for users looking to integrate analog phones into a VoIP environment. With its dual port capabilities, high-quality voice codecs, advanced call features, and security measures, it offers a compelling choice for both residential and commercial users seeking seamless telephony integration. As technology evolves, devices like the ATA 186 remain cornerstones in bridging traditional telephony with modern communication systems.
Top Page Image Contents