Cisco Systems ATA 186, ATA 188 manual What You Need, Steps Needed to Configure the Cisco ATA

Contents

Installing the Cisco ATA	2-1
Network Requirements	2-2
Safety Recommendations		2-2
What the Cisco ATA Package Includes			2-2
What You Need 2-3
Installation Procedure	2-3
Power-Down Procedure	2-6
Configuring the Cisco ATA for SCCP			3-1
Default Boot Load Behavior		3-2
Specifying a Preconfigured VLAN ID or Disabling VLAN IP Encapsulation 3-3
Steps Needed to Configure the Cisco ATA 3-6

Basic Configuration Steps in a Cisco CallManager TFTP Server Environment 3-6

Basic Configuration Steps in a Non-TFTP Server Environment 3-7

Configuring the Cisco ATA Using a TFTP Server					3-7
Setting Up the TFTP Server with Cisco ATA Software							3-8
Configurable Features and Related Parameters						3-8
Parameters Not Used for SCCP			3-10
Creating a Cisco ATA Default Configuration File						3-10
Creating a Configuration File for a Specific Cisco ATA							3-12
Using atapname.exe Tool to Obtain MAC Address							3-13
Using the EncryptKey Parameter and cfgfmt Tool							3-14
Configuring the Cisco ATA to Obtain its Configuration File from the TFTP Server 3-15
Using a DHCP Server		3-15
Without Using a DHCP Server				3-17
Voice Configuration Menu	3-18
Using the Voice Configuration Menu				3-18
Entering Alphanumeric Values			3-20
Resetting the Cisco ATA to Factory Default Values 3-20
Cisco ATA Web Configuration Page			3-21
Resetting the Cisco ATA Using Cisco CallManager						3-23
Upgrading the SCCP Signaling Image			3-24
Adding the Cisco ATA to the Cisco CallManager						4-1
Adding Cisco ATAs Manually		4-2
Using the Cisco Bulk Administration Tool (BAT)					4-3
Using Auto-Registration	4-4

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

iv OL-3141-01