Chapter 4 Adding the Cisco ATA to the Cisco CallManager

Using the Cisco Bulk Administration Tool (BAT)

Step 11 Click the Insert button (called the Update button in Cisco CallManager version 3.2).

A popup window asks you if you want to return to the current-device page. Click OK.

Step 12 To add a second FXS port to Cisco CallManager, go back to Step 3 and proceed from there.

You need to fabricate a MAC address for the Phone 2 port by dropping the two left-most digits from the Cisco ATA MAC address and add the digits 01 to the right-most portion of the MAC address.

Example

If the MAC address of the Cisco ATA is 00070EA26032, then the fabricated MAC address for the Phone 2 port would be 070EA2603201.

Note By default, both Cisco ATA FXS ports are enabled for Cisco CallManager registration. If you do not want to add the Phone 2 FXS port to Cisco CallManager, you must change the Cisco ATA EPID1orSID1 parameter value to 0 to disable the Phone 2 port. (To disable the Phone 1 port, you must change the EPID0orSID0 parameter value to 0.)

Using the Cisco Bulk Administration Tool (BAT)

The Cisco Bulk Administration Tool (BAT) is a plug-in application for Cisco CallManager that enables system administrators to perform batch operations, including registration, on large numbers of Cisco IP Phones and Cisco ATAs.

Refer to the Bulk Administration Tool Guide for Cisco CallManager for instructions on using BAT to add Cisco ATAs to the Cisco CallManager.

You will need to know the following information when you use the BAT tool:

•When you use the Phone Type drop-down list, make your device-type selections as follows:

–If you are using Cisco CallManager version 3.0 or 3.1, select Cisco 7960.

–If you are using Cisco CallManager version 3.2, select Cisco ATA 186.

•When you use the Phone Configuration screen, you must enter information in the following fields:

–MAC Address—Enter the MAC address of the Cisco ATA. The MAC address is labeled at the bottom of the Cisco ATA. (You can also use the atapname.exe tool to determine the MAC address of the Cisco ATA. For information on how to use thiis tool, see the “Using atapname.exe Tool to Obtain MAC Address” section on page 3-13.)

–Device Pool—Select either the Default value or a configured device pool from the drop-down list.

–Phone Button Template—From the drop-down list, select Standard 7960 if you are using Cisco CallManager version 3.0 or 3.1; select Standard ATA 186 if you are using Cisco CallManager version 3.2

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

 

Ol-3141-01

4-3

 

 

 

Page 58 Page 60
Page 59
Image 59
Cisco Systems ATA 188, ATA 186 manual Using the Cisco Bulk Administration Tool BAT, Example
Page 58 Page 60

ATA 188, ATA 186 specifications

The Cisco Systems ATA 186, or Analog Telephone Adapter, revolutionized the way traditional telephony interacted with Voice over Internet Protocol (VoIP) systems. Designed primarily for home and small office use, the ATA 186 allows users to connect standard analog phones and fax machines to a network, enabling them to take advantage of the benefits of VoIP technology.

One of the defining features of the ATA 186 is its dual port architecture. It includes two FXS ports, allowing users to connect up to two analog telephones. This functionality means that multiple devices can leverage VoIP services simultaneously without the need for separate adapters for each phone. The flexibility of the ATA 186 helps streamline the user experience, facilitating voice communication over an IP network while ensuring users can still use their existing phone equipment.

The ATA 186 employs various technologies to maintain high-quality voice calls. It supports standard voice codecs such as G.711 and G.729, which ensure efficient bandwidth usage while preserving call clarity. The adaptive jitter buffer technology further enhances call quality, compensating for network variations and minimizing latency, which is crucial for clear and uninterrupted conversations.

Additionally, the ATA 186 provides users with advanced calling features that were traditionally available only on PBX systems. These features include caller ID, call waiting, and voicemail functionality, integrating seamlessly with typical telephony services. The device also supports T.38 fax relay, allowing users to send and receive faxes over the internet, thus addressing the needs of environments where fax communication remains essential.

The security of VoIP conversations is also a priority for the ATA 186. It employs encryption protocols such as Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS), ensuring that voice data is securely transmitted across the network. This focus on security helps protect sensitive information transmitted during calls.

Installation and configuration of the ATA 186 is streamlined, with an intuitive web-based interface that simplifies the setup process. This accessibility makes it suitable for users with varying levels of technical expertise, as frequently required adjustments, such as network configurations and firmware updates, can be easily managed.

In conclusion, the Cisco Systems ATA 186 stands out as a versatile and robust solution for users looking to integrate analog phones into a VoIP environment. With its dual port capabilities, high-quality voice codecs, advanced call features, and security measures, it offers a compelling choice for both residential and commercial users seeking seamless telephony integration. As technology evolves, devices like the ATA 186 remain cornerstones in bridging traditional telephony with modern communication systems.
Top Page Image Contents