Cisco Systems ATA 188 manual CA0orCM0 and CA1orCM1, Range, Voice Configuration Menu Access Codes

Chapter 5 Parameters and Defaults

Account Information Parameters

Range

Maximum 51 characters for each parameter

Voice Configuration Menu Access Codes

46 and 47 for EPID0orSID0 and EPID1orSID1, respectively

CA0orCM0 and CA1orCM1

Description

CMx specifies the IP address (with an optional port number) or the URL of the primary or secondary Cisco CallManager to which the Cisco ATA should register. Use the CM0 parameter for the primary Cisco CallManager and the CM1 parameter for the secondary Cisco CallManager parameter. (CAx is not for SCCP.)

Note Use this parameter only if the default Cisco CallManager TFTP method is not desirable for configuring the Cisco CallManager IP address, in which case you must set the UseTftp parameter to 0.

If you specify a Cisco CallManager port, you must separate the port number from the host IP address with a colon (:).

Examples

Examples of CA0orCM0 values follow:

•192.168.1.2:2727

•ca.cisco.com.

Value Type

Alphanumeric string

Range

Maximum 31 characters

Default

0

Voice Configuration Menu Access Code

5 and 6, respectively

Related Parameters

•UseTFTP, page 5-4

•Domain, page 5-16

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (SCCP)

Ol-3141-01 5-9