Quick Reference Guide | Uniden EXI2246 manual

Step 1 Charging the Battery

TO INSTALL THE HANDSET BATTERY

1 Remove the cover.

Connect the battery pack

2 connector with the correct polarity.

3 Replace the cover.

TO PLUG INTO AC POWER

1Plug AC adapter cord into the base unit and then into a 120V AC outlet.

2Place the handset on the base.

Note: You must charge the battery continuously for 15 - 20 hours before using the phone.

Step 2 Connecting

CONNECT TO A PHONE LINE

When the handset battery pack is fully charged, after 15-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack.

Your phone is set for tone dialing. If your local network requires pulse dialing, please see “Choose the dialing mode” on page 15.

Step 3 Setting Up the Caller ID/Language

Note: Three Caller ID options are available: AutoTalk, Caller ID on Call Waiting (CIDCW), and Area Code.

TO CHANGE CALLER ID OPTIONS

1Press and hold call id/menu.

2Press or to move the pointer to an option.

3Press select to change the option setting.

4Press end and return the handset to the base.

TO CHOOSE THE LANGUAGE

1Press and hold call id/menu.

2Press or to move the pointer to

Language.

3Press select to select Eng (English) or Fr. (French).

4Press end and return the handset to the base.

QUICK REFERENCE GUIDE

Q U I C K R E F E R E N C E G U I D E [ 3 ]

Image 5

Uniden EXI2246 manual Quick Reference Guide

Contents

Page Page Contents Welcome Features Quick Reference Guide Controls and Functions Status LED 9 to Read this First Checking the Package Contents Do the following steps Setting up the PhoneChoose the best location Use only the Uniden battery BT-905 supplied with your Cleaning the Battery Charging Contacts Battery use time per chargeLow Battery Alert Connect the base unit Standard wall plate mounting Mounting the Base Unit on a Wall Direct wall mounting Terminology Caller ID options Setting Menu Options Choosing the dialing mode Setting the language Handset On Base Handset Off Base Making and Receiving Calls Handset ringer tone and volume Adjusting the Handset Ringer and Earpiece VolumeEarpiece volume Ringer Mute Traveling Out-of-Range Tone Dialing Switch-overRedial Flash and Call Waiting HintsSelecting a Different Channel Memory Dialing Storing Phone Numbers and Names E M O R Y D I a L I N G Number of times key is pressed Steps for Entering Names and Special CharactersIf you make a mistake while entering a name E M O R Y D I a L I N G Display a Programmed Number Memory dialing from Standby ModeMaking Calls with Memory Dialing Chain Dialing Memory dialing from Talk Mode Editing a Stored Name and/or Phone Number Memory 1 Stored Memory Store Press select or delete/ch Erasing a Stored Name and Phone Number Making Calls with the RocketDial RocketDialStoring and Editing the RocketDial C K E T D I a L Deleting the RocketDial Caller ID When the Telephone RingsYou must subscribe to Caller ID service to use this feature Viewing the Caller ID Message List Standby mode When the pointer is at ¨No¨ When the pointer is at ¨Yes¨Deleting Information from the Caller ID List Deleting a Caller ID message Tone sounds and all stored Caller ID messages are deleted Long Distance calls and Area Code Setting/Cancellation Using the Caller ID ListCalling a party from the Caller ID list Dial edit Storing Caller ID messages in Memory dialing Headset Installation Installing the BeltclipChanging the Digital Security Code To attach the beltclip Maintenance Symptom Suggestion Troubleshooting Symptom Suggestion AC Adapter Information Battery InformationGeneral Information Precautions Installation Considerations Terminal Equipment Radio Equipment K, L Index Memo E M O At Uniden, we´ll take care of you