1) When the phone is in the standby mode, press and hold call id/menu. The following screen appears.

2) Press 4 or press three times to select ¨Dial¨.

3) Press select to toggle between ¨Tone¨ and ¨Pulse¨ for each setting.

4)Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.

If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set for pulse dialing.

If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may "switch-over" to tone dialing. (Refer to "Tone Dialing Switch-over" on page 19.)

Setting the language

1) When the phone is in the standby mode, Press and hold call id/menu. The following screen appears.

2) Press 5 or press four times to select ¨Language¨.

3)Press select to toggle between ¨Eng¨ and ¨Fr.¨ for each setting.

4)Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.

[ 16 ] G E T T I N G S T A R T E D

Page 18
Image 18
Uniden EXI2246 manual Setting the language