Uniden EXS 2080 manual Direct wall plate mounting

If you have wall mounted the base, you must remove the beltclip to charge the handset facing forward.

8 On the base unit, pull the

Handset retainer

handset retainer out of the slot. Rotate it clockwise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is

up and is down. The retainer holds the handset in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws with (minimum length of 1-3/8 inches) anchoring devices suitable for the wall material where the base unit will be placed.

TOP		1 Insert two mounting screws
	3/16 in.
		into the wall, (with their
		appropriate anchoring device),
		3-15/16 inches apart. Allow
		about 3/16 of an inch between
	3-15/16 in.	the wall and screwheads for
		mounting the phone.
		2 Refer to steps 1 through 9 on
		page 7 and 8 to mount the
		telephone.

8