Uniden EXS 2080 manual Symptom Suggestion, Status LED wont Make sure the AC adapter is plugged

TROUBLESHOOTING 50

If your phone is not performing to your expectations, please try these simple steps first.

Symptom	Suggestion
The status LED won't • Make sure the AC adapter is plugged
come on when the	into the base unit and wall outlet.
handset is placed in	• Make sure the handset is properly
the base unit.	seated in the base unit.
	• Make sure the charging contacts on
	the handset and base unit are clean.

The audio sounds	• Press select/ch to help eliminate
weak and/or scratchy.	background noise.

•Make sure that the base unit antenna is in a vertical position.

•Move the handset and or base unit to a different location away from metal objects or appliances and try again.

•Make sure that you are not too far from the base.

Can't make or receive	• Check both ends of the base unit
calls.	telephone line cord.
	• Make sure the AC adapter is plugged
	into the base unit and wall outlet.
	• Disconnect the AC adapter for a few
	minutes, then reconnect it.
	• Reset the digital security code
	(See page 47).
	• Make sure talk is pressed.
The handset doesn't	• The battery pack may be weak.
ring or receive a page.	Charge the battery on the base unit
	for more than 15-20 hours.
	• The handset may be too far away
	from the base unit.
	• Place the base unit away from
	appliances or metal objects.
	• Reset the digital security code
	(See page 47).
	• Make sure the ringer switch is on
	(See page 15).