Uniden EXS 2080 manual Setting Caller ID options, Auto TalkOff, Area Code, Auto Talk and Cidcw

You must subscribe to Caller ID on Call Waiting in order to use this feature.

You must subscribe to the Caller ID service to use this feature.

When the telephone rings, the Caller ID feature allows you to view the caller's name and phone number on the display before you answer the phone.

The handset displays the phone number of the incoming call, the name, time, and the number of calls. Additionally, you can dial the displayed number, and store the information for memory dialing.

CALLER ID FEATURES

Setting Caller ID options

There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code.

AutoTalk allows you to answer the phone without pressing the

talk button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not on the base press any key (except mute/ring ) to answer the call. If the phone rings when AutoTalk is off, you must press talk to answer the call.

Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting number.

You must subscribe to CIDCW from your phone company in order to use this feature.

If you enter 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

If your calling area requires 10-digit dialing, do not program this option.

To change your Caller ID options:

1								1 Auto Talk:Off
	Press down set up						.	2 CIDCW	:On
	The following screen appears.							3 Area Code:
2	Use the		•	and		ª	keys or a number key(1-3) to move
	the cursor to the selection that you would like to change.
	Press the		select/ch			key to toggle between On and Off for
3	Auto Talk and CIDCW.
	When you wish to enter Area Code, press ª or the number
	key	3	to move the cursor to select Area Code. Then
	press	select/ch			and enter the 3 digits area code by using the
	number keypad				0		- 9 . After entering Area Code, press
4	select/ch .
	After you have made your selections, press set up								and	27
	return the handset to the base.