Setting Answer on Hold

This feature allows you to hold an incoming call when you cannot answer immediately.

To set Answer on Hold:

1.When you receive an incoming call, press Options (right softkey).

2.Highlight Answer on Hold and press . (The caller hears a message to wait your answer. will display on the screen while the call is on hold.)

To resume the call:

Press Answer (left softkey) or .

– or –

Press Options (right softkey), highlight Answer or

Answer:Speaker and press .

Note: Answer on Hold is not available in analog areas.

Ending a Call

To disconnect a call when you are finished:

With the Flip open:

Close the phone or press .

With the Flip closed:

Press and hold .

Note: If the setting for Close Flip is not set to “End,” closing the phone will not end the call. (See “Setting the Open/Close Flip Option” on page 77.)

Tip: Time/Date is displayed when you press while the phone is in use.

30

Section 2A: Your Sprint PCS Phone – The Basics

Page 46
Image 46
Sanyo MM-8300 manual Setting Answer on Hold, Ending a Call, AnswerSpeaker and press