Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.
DO NOT use an outlet controlled by a wall switch.
6
WALL INSTALLATION
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1 Snap the wall mount adapter into the notches on the base.
2. Plug the telephone line cord to the TEL LINE 1/2 jack and the AC adapter to the DC IN 10V jack.
3. Plug the telephone line cord into the telephone outlet.
4. Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.
5. Plug the AC adapter into a standard
120V AC wall outlet.
6. Raise the antenna to a vertical position.
7. Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated.
