Uniden EXT1160, EXT1165 manual C. Connect the base unit, 3Raise the antenna to a vertical position

C. Connect the base unit

1)Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet.

2)Set the base on a desk or tabletop, and place the handset on the base unit as shown. Remove the beltclip, if attached, for face up charging. (See "Mounting the Base Unit on a Wall", on page 11.)

3)Raise the antenna to a vertical position.

4)Make sure that the voice messages/status LED indicator lights. If the LED does not light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

•Use only the supplied AD-310 AC adapter. Do not use

any other AC adapter.

•Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

•The handset can be placed face up or face down in the base for charging.

•You have to remove the beltclip, if attached for face up charging.

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

INSTALLING AND GETTING STARTED ADJUSTING

G E T T I N G S TA R T E D [ 9 ]