USING YOUR FP100
PAUSE
During the memory storage procedure you may enter a 4 second delay between numbers (for accessing a switchboard, or long distance service) by pressing the 
button on the Handset at the point in the number sequence you
wish to pause. The 
button counts as one digit. Pressing 
more than once will increase the length of the pause between numbers.
DIALING ONE TOUCH SPEED DIAL MEMORY NUMBERS For example, to dial memory 3 from the telephone
1.Pick up the Handset.
2.Press the 
button.
The telephone will dial the number stored in this memory location.
USING YOUR FP100
NOTE: If you select a memory location that does not have a stored number, the telephone will not dial.
CHAIN DIALING
On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as when performing a banking transaction. Simply store this number in another memory location, refer to “Storing Memory Dial Numbers” on Page 13.
In this way you can recall both numbers that are stored into their own memory locations at the relevant times.
14
