Uniden FP101 manual Placing a Telephone Call, Redial, Receiving a Telephone Call

USING YOUR FP101

USING YOUR FP101

PLACING A TELEPHONE CALL

1.Remove the Handset from the Base.

2.Press the keypad buttons to dial the phone number you want.

3.After you have completed the phone call, place the Handset back on the Base.

REDIAL

If you want to redial the last number dialed, simply pick up the Handset

then press the button. The telephone will automatically redial the last number dialed.

RECEIVING A TELEPHONE CALL

When the phone rings, pickup the Handset from the Base and begin the conversation.

ACCESSING THE CALL WAITING SERVICE USING THE

CALL WAITING BUTTON (New Zealand Model only)

While talking you hear the Call Waiting beep signal.

Press the button. This feature sends a 600mS timed “hook-flash” on the telephone line for accessing services such as Call Waiting, etc.

NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.

ACCESSING THE CALL WAITING SERVICE USING THE

CALL WAITING BUTTON (Australian Model only)

1.While talking, you hear the call waiting signal (series of beep tones).

2.Press the button then to switch call and put the current call on hold.

3.To switch back to original call, press the button then .

NOTE: The + call waiting procedure toggles call between the

incoming and the original call (vice versa). The + procedure will drop the current call connection and pick up the incoming call or the call on hold.

18