Uniden FP101 manual Block CID, Divert On

USING YOUR FP101

USING YOUR FP101

USING THE PRE-PROGRAMMED FEATURE BUTTONS (Australian Model Only)

Instant access to some of Telstra’s most popular network service features have been factory programmed into this telephone for your convenience.

Block CID

Each time you make a call, your telephone number is automatically forwarded to the party you are calling (unless your number is a silent number). In certain cases you may wish to prevent your number being sent.

Pick up the handset, wait for the dial tone, press the button and then dial the telephone number of the person you wish to call. Your telephone number will be withheld for this call only.

Divert On

Telstra’s ‘Call Forward No Answer’ Service is available for diverting calls to another number if your phone is not answered within 20 seconds (approximately 7 or 8 rings).

Pick up the handset, wait for the dial tone, press the button and then hang up. The telephone will automatically dial the access code ‘*61#’ and will enable ‘Call Forward No Answer’ to the fixed number you have previously assigned the divert to.

NOTE: To program, or re-program the fixed ‘Call Forward No Answer’ number, follow the example below, replacing the number 9876 5432 with the number you wish to divert calls to.

Pick up the handset, wait for the dial tone then press

. You will hear a long beep and a voice

announcement confirming that this feature has been activated, then you can hang up.

To confirm the diverted number, turn ‘Call Waiting’ off, then dial your own number. The number you are forwarding your calls to will begin to ring. The normal Local, Mobile or National Call charges will apply.

22