Uniden FP102 manual Placing a Telephone Call, Redial, Receiving a Telephone Call

USING YOUR FP102

USING YOUR FP102

LED indicators

1.call LED indicator: Red light which flashes when the telephone is ringing.

This is sometimes referred to as a ‘Visual Ringing Indicator’.

2.status LED indicator:

a.Solid red light when ‘In Use’.

b.Solid green light when in Speakerphone mode.

c.Flashing green light when on ‘Hold’.

PLACING A TELEPHONE CALL

1.Remove the Handset from the Base, or press the button.

2.Press the keypad buttons to dial the phone number you want.

3.After you have completed the phone call, place the Handset back on the Base.

REDIAL

If you want to redial the last number dialed, simply pick up the Handset or

press the button, then press the button. The telephone will automatically redial the last number dialled.

RECEIVING A TELEPHONE CALL

When the phone rings, pickup the Handset from the Base, or press the button and begin the conversation.

ACCESSING THE CALL WAITING SERVICE USING THE

CALL WAITING BUTTON (New Zealand Model only)

While talking you hear the Call Waiting beep signal.

Press the button. This feature sends a 600mS timed “hook-flash” on the telephone line for accessing services such as Call Waiting, etc.

NOTE: You must subscribe to Telecoms Call Waiting Service before you can use this feature.

18