USING YOUR FP102

USING YOUR FP102

To make a SpeakerPhone call, press the button, listen for the dial tone then use the keypad to dial the number you want to call. Lift the Handset to resume normal conversation.

During a regular telephone conversation you can press the button and replace the Handset. The status LED turns green and you can begin your SpeakerPhone conversation.

NOTE: The status LED turns green during SpeakerPhone use, and red during normal use.

NOTE: It is not recommended to operate the

function under

noisy conditions.

 

NOTE: During a conversation you can adjust the speaker Volume Control on the side of the telephone to increase or reduce the other parties voice.

USING THE PRE-PROGRAMMED FEATURE BUTTONS (New Zealand Model only)

Instant access to some of Telecom’s most popular network service features have been factory programmed into this telephone for your convenience.

Call Minder

Telecom’s Call Minder Message Centre is available for leaving and retrieving messages.

Pick up the handset or press the button. Wait for the dial tone then

press the button.

The telephone will automatically dial the access code ‘083210’ to connect you with Telecom’s ‘Call Minder’ service. Telecom’s ‘Call Minder’ Service will talk you through the rest.

Divert On

Telecom’s ‘Immediate Call Diversion’ Service is available for diverting calls to another number.

20

Page 20
Image 20
Uniden FP102 manual Call Minder, Divert On