USING YOUR FP102

ACCESSING THE CALL WAITING SERVICE USING THE

CALL WAITING BUTTON (Australian Model only)

1.While talking, you hear the call waiting signal (series of beep tones).

2.Press the button then to switch call and put the current call on hold.

3.To switch back to original call, press the button then .

NOTE: The + call waiting procedure toggles call between the incoming

and the original call (vice versa). The + procedure will drop the current call connection and pick up the incoming call or the call on hold.

MUTE

Press and hold the button to turn off the Handset microphone, allowing private and confidential conversations in the same room without the calling party

hearing. Release the button to resume the conversation with the calling party.

PLACING A CALL ON HOLD

1.To place a call on hold, press the button. The status LED will flash green and you can hang up. (The Party on Hold will hear music).

2.To begin the conversation again:

Pick up the Handset or press the button or pick up an extension phone, the hold function will then be automatically released.

MUSIC ON HOLD

When a call is placed on Hold, the status LED flashes and the telephone will play a popular melody to reassure your caller that the call has not been disconnected.

SPEAKERPHONE

To answer an incoming call, press the button and begin your hands free SpeakerPhone conversation. Lift the Handset to resume normal conversation

USING YOUR FP102

19

Page 19
Image 19
Uniden FP102 manual Call Waiting Button Australian Model only, Mute, Placing a Call on Hold, Music on Hold, Speakerphone