Strong Signals Medium Signals Weak Signals Noise

Operation

+When you press any key (except PTT), a short tone sounds.

+When you turn on your HH985, it is automatically tuned to channel 16, the United States Coast Guard frequency for distress, safety, and calling.

+See the foldout in the front of the operating guide for button, knob, and key positions.

Turning on the Unit and Setting Squelch

1. Before you turn on the unit, turn the Squelch knob fully counterclockwise.

2.Then, turn on the unit by turning the

Volume/Power knob clockwise until you hear a hissing sound.

3.Turn the Squelch knob clockwise, just until

the hissing sound

stops. Use the knob to adjust to the desired squelch level. Think of the squelch control as a

frequency gate which controls access to weak or strong signals depending on its setting.

+To listen to a weak or distant station, turn the knob counterclockwise. If reception is poor, turn it clockwise to cut out weak transmissions.

+If the squelch control is adjusted so you continually hear a hissing sound, the unit will not scan properly.

4.To turn off the unit, turn the Volume/Power knob counterclockwise until it clicks.

8

Page 10
Image 10
Uniden HH-985 warranty Operation, Turning on the Unit and Setting Squelch