Registering FIPS Code
Six digit FIPS Codes are programmable in 15 channels, Number 1~15 for
1.Press and hold the MEM key for 2 seconds.
2.Select the channel,
numbers 1~15, you want to program using the s or t key.
3.Press the MEM key to enter the FIPS Code edit mode.
4.To enter the first digit of the code,
change the left blinking digit on the display using the s or t key and press the MEM key. The right digit starts to blink.
5.To enter the second digit of the code, change the right blinking digit on the
display using the s or t key and press the MEM key.
The entered digit moves to the left and the right digit starts to blink.
6.Repeat step 5 for the remaining digits of the code.
7.After the last digit registers, the entered code appears on the display automatically for confirmation.
8.To exit from this mode, press and hold the MEM key for 2 seconds.
9.Press U/I/C to clear the stored FIPS Code in the displayed location.
+Pressing the MEM key for more than 2 second in the middle of the above steps prevents registration.
14
