Programming a Channel into Memory
Before using the scanning feature, you have to program channels
into memory.
Select the channel to enter into memory
by pressing the ▲or ▼button.
Press the MEM/FIPSbutton to store the
channel. MEMappears on the display.
Deleting a Channel from Memory
Select the channel to delete from
memory by pressing the ▲or ▼button.
Press the MEM/FIPSbutton.
MEMdisappears from the display.
Scanning
To begin scanning the programmed
channels, press the SCANbutton. SCAN
and TRIappear on the display.
To stop scanning, press the SCAN
button once more. SCANand TRI dis-
appear from the display.
• Scanning starts from the lowest to highest channel and stops
when it finds an active channel. It remains on that channel until
the transmission ends, then resumes scanning after a 2 second
delay period.
•When in the scan mode, the unit automatically activates the
Triple Watch feature. To deactivate Triple Watch from the
scanning mode, press and hold the 16/9/TRIbutton for
2 seconds. TRIdisappears from the display.
2
1
2
1
2
1
18
UT01919ZC_0 (ENG) 5/8/07 1:27 PM Page 18