Transmitting
Transmission power can be set to either
5W or 1W.
Press the 1/5W/LOCKbutton to make
the change, then the 5Wor the 1W
indicator on the display changes
accordingly.
To transmit, press and hold the PTT(push-to-talk) key.
TXappears on the display.
To return to receive, release the PTTkey.
TXdisappears from the display.
•If the PTTkey is pressed for more than 5 minutes, TX starts
blinking and the transmission ends. The TX time out tone will
sound until the PTTkey is released.
•If the battery indicator level is 0 and the PTTkey is pressed, the
radio will not transmit and the TXicon and the channel number
start blinking. (Refer to the description of the Battery Indicator
on the next page.)
Lighted Keys and Display
To light the display, press any key excluding the PTTkey.
•If you press any button other than the PTTkey while the display
and keypad are illuminated, it remains illuminated for another
5 seconds.
Turning Off and Reactivating the Key Beep
Your radio emits a beep each time one of the buttons (except for
the PTTkey) is pressed.
To turn off or reactivate the Key beep:
Turn the radio On again while pressing and holding the ▲or
▼buttons.
3
2
1
19
UT01919ZC_0 (ENG) 5/8/07 1:27 PM Page 19