OPERATOR TROUBLESHOOTING
Should the unit malfunction or not per- form properly, the operator should per- form the procedures indicated below:
1.Ifthe transceiver is completely inop- erative.
*Check the power cord and fuse.
2.If trouble is experienced with receiv- ing.
*Check ON/OFF VOLUMECON- TROLsetting.
*Be sure SQUELCHis adjusted
properly. If the radio over- squelched?
*Check to see that the radio is switched to an operational mode.
3.If trouble is experienced with trans- mitting.
*Check to see that the transmission
line (coaxialcable) is securely con- nected to the ANTENNA CON-
NECTOR.
*Be sure that the antenna is fully extended for proper operation.
*Besure that all transmission line
(coaxialcable) connections are se- cure and free of corrosion.
We highly recommend that you consult a qualified radiotelephone technician for the seNicing and alignment of this CB radio product
Please refer to the WARNING informa- tion contained in this Owner's Guide.
(NOTE: When ordering parts, it is es-
sential to specify the correct model number and serial numberof the unit)
