 If you want to use the MULTIRANGETM charger with a different base, just register the charger to the new base. The charger automatically erases the link to the old base when it registers to the new one.

 Only register the charger to one base at a time. If more than one base is in registration mode at the same time, you can't control which base the charger registers to.

Placing the MULTIRANGETM charger

Here are a few tips for placing your MULTIRANGETM charger so that you get the clearest signal and the maximum range:

 Make sure you have good reception from the base.

 Put the charger at least 35 feet away from the base or any other charger. (If you put the charger on a different floor from the base, don't forget to allow 35 feet vertically, also.)

 If possible, mount the charger on the wall.

Picking the best spot

The best spot for the MULTIRANGETM charger is as far from the

base as possible while still maintaining a good signal, or near the edge of the base’s coverage area. To find the edge of the coverage area:

1. Stand near the base and make a call on the handset.

2.While on the call, carry the handset away from the base towards the general area where you want to put the charger.

8

Page 8
Image 8
Uniden PS-0033 manual Placing the Multirangetm charger, Picking the best spot