![](/images/new-backgrounds/1263911/26391151x1.webp)
4.Enter the higher limit of your search range.
5.Press
.
Using the Limit Search
1.Press /BAND to enter Limit Search mode.
2.Press or
to stop searching. (”HOLD” appears on the display.)
VFO search
You can search by using VFO control.
1.In Manual mode, enter the frequency by using the number keypad and turnVFO control.
--OR
In Band Search or Limit Search, press then enter the frequency by using the number keypad, and turn the VFO control.
“V ” appears on the display.
2.Turn the VFO control clockwise to move up the frequency step, and turn the VFO control counter- clockwise to move down the frequency step.
3.When you wish to store frequency or change the
channel, you need not press first.
Search Skip Frequency.
The scanner may stop at certain frequencies during Search that you do not want to hear. You can program up to 50 Skip Frequencies into the SportCat. When the scanner stops at one of these frequencies during
Search, press . That frequency is now “memorized” and will be skipped during any Search. The scanner will then search to find other active frequencies. If you enter the 51st frequency, the 1st one is overwritten.
23