B.Channel Number — Indicates the current channel that the scanner is on.
C.Memory Bank Numbers — Each Memory Bank consists of 10 channels that you can select or deselect during scanning operation, using the numeric keypad. When you select a Bank, its number appears on the display. When you
deselect a Bank, its number disappears from the
display. When you press 
to stop scanning, only the Bank of the current channel appears.
D.Bank Indicator — Appears with the Bank Numbers (1~10).
E.Frequency Indicator — Indicates the frequency being received by the scanner, or Alpha Name, etc.
F.Low Battery Indicator — Appears on the display when the Battery Pack is low and needs recharging.
G.Mode/Function Indicators — (Only the active mode(s)/function(s) are displayed during operation.)
SCAN Indicates SCAN Mode.
SEARCH Indicates SEARCH Mode. Flashes when in TURBO SEARCH Mode.
PRIORITY Indicates PRIORITY SCAN is activated.
HOLD Indicates SCAN HOLD or SEARCH HOLD Mode.
DELAY Indicates DELAY is activated.
L/O In SCAN Mode, indicates the channel shown is “Locked Out”. In SEARCH Mode, indicates the frequency shown is “Locked Out”.
WX Indicates WEATHER SCAN Mode.
ATT Appears when the Attenuator function is set.
Indicates the keypad is locked.
Appears when the display mode is
Alpha Name mode.
2.Press 
to start scanning all programmed channels that are not locked out. (SCAN moves across the display during scanning.)
7
